Another overlooked category of firearm is the shotgun. Next to the .22 rifle, the shotgun has to be the most commonly available firearm. Like the .22, shotguns are also available in a variety of action types--break-open single shots, pumps, bolt actions, and semiautomatics. They are also available as side-by-side and over-under doubles, but seldom will you find these in the less-than-$100 category. If you look long enough, however, you'll be surprised at what you can find!

This single-barrel 12-gauge Stevens Model 220 has a poorly finished and broken stock. Because of this the price was very modest.

Even more than .22 rifles, shotguns seem to have suffered a lot of abuse. It's not unusual to find shotguns with lots of rust and virtually no original finish on either the wood or metal. That's a bonus for hobbyists; that poor exterior condition can help keep the price down.

Although the golden age of inexpensive imported military surplus Mausers has passed, you can still occasionally find a good military surplus project gun. The trick is to not look for unaltered rifles in pristine or even good condition. Instead, look for older sporterized military rifles. Recently I was at a local gun show and ran across a 1903 Springfield made by Remington in the early 1940s. The rifle had been sporterized, and from the looks of the stock I would guess that it was done back in the '60s. The handiwork was pretty awful, and the barrel was absolutely ruined with a bore that closely resembled the inside of a cast iron sewer pipe. In short, this rifle was a dog! And it sure didn't attract any interest from other folks at the show.

But I saw it as a project gun. Sure, the barrel was worthless, but the action was good. Best of all, the only holes drilled into the receiver were on the right side for a peep sight. Also, the stock, though poorly shaped and finished, had some possibilities for rework or repair. Yeah, that Springfield might have been a dog, but it was a darn good dog!

It's true that many of the repeating .22s and shotguns are mechanically more complex than a standard Mauser or Enfield. This can make mechanical repairs a bit more challenging, but to me that's part of the real value of these guns. After all, if you go forward with your gunsmithing and end up in a shop some day, you're a lot more likely to find yourself working on repeating shotguns and .22 rifles than you are on simple bolt-action Mausers. The experience you gain in figuring out why that Marlin Model 60 .22 rifle is jamming or why that old Remington Model 11 12 gauge is double feeding someday will pay off.

Stocks & Parts
When working on older rifles and shotguns, there are two things you'll need: stocks and parts. One of the best sources for an absolutely incredible variety of parts and stocks is Numrich Gun Parts Corp. in West Hurley, New York. These folks are far and away the largest, most complete supplier of parts for obsolete or out-of-production firearms in the country. If you don't have one of their latest catalogs, which runs to well over 1200 pages, you need to get one right away.

Another valuable resource for replacement stocks for older U.S.-made commercial firearms is Boyds' Gunstock Industries. Boyds is currently the largest producer of factory replacement stocks in the U.S.

Not only is the inletting bad on this 1903 Springfield, but the buttstock is so poorly shaped that it almost looks like it will break off from the pistol grip. A military rifle collector sees it as a ruined 1903 Springfield, but the gunsmith hobbyist sees it as great project gun.

And speaking of stocks, you don't have to buy a gun in order to have a stock to work on. At most gun shows you'll find someone who has parts for sale, and more often than not he'll have some stocks. You don't need good ones! Tell him you're looking for project stocks and more than likely he'll drag some out from under his table and fix you up! Not long ago I bought eight assorted commercial stocks for about four bucks each. They were cracked, had bad finishes, and suffered from various problems, but they were absolutely ideal for project pieces. I was happy, and the dealer was delighted to get rid of those damaged sticks of wood.

Like I said, you won't get good at hobby gunsmithing unless you get your hands dirty working on some guns. And while much of the gunsmithing literature involves military surplus rifles, which can be hard to find these days, don't forget that older U.S.-made .22 rimfires and shotguns are readily available and can provide the hobbyist with countless hours of work and enjoyment.

Until next time, good luck and good gunsmithing!