Lever-action rifles have endeared themselves to American shooters since their introduction in the late 1800s. One of the earliest names associated with lever actions is Henry, which is considered by many to be the first truly successful lever-action design. That name endures to this day as Henry Repeating Arms Co. Located in Brooklyn, New York, the company produces quality lever actions ranging in caliber from .17 to .44.

Marbles sights are drift-adjustable for windage and have more than 9 inches of elevation adjustment at 25 yards by way of a stepped elevator.

Shooting Times recently received one of Henry's octagon-barreled .22 Magnum rifles for review. This gun embodies the handling qualities and styling that make lever actions so popular, and it combines them with a powerhouse rimfire cartridge and modern manufacturing methods to create a rifle that Henry properly calls "Made in America and Priced Right."

The most significant manufacturing feature that lets Henry make the "priced right" claim is the use of a zinc/aluminum alloy outer cover surrounding an internal receiver in lieu of a traditional machining-intensive solid-steel receiver. Functionally, the receiver cover helps guide the bolt, and it covers the internal receiver proper. Five simple screws--two on each side of the cover and one at the rear of the top tang--secure it solidly in place.

SPECIFICATIONS
Manufacturer:	Henry Repeating Arms Co.
Model:	H001TM Lever Octagon .22 Magnum
Operation:	Lever-action repeating rifle
Caliber:	.22 Magnum
Barrel Length:	20 inches
Overall Length:	38.5 inches
Weight, empty	6.25 pounds
Safety:	Hammer halfcock
Sights:	Brass bead on post front, stepped elevator-adjustable rear, 3/8-inch dovetail scope rail
Stock:	Walnut
Length of Pull:	13.88 inches
Finish:	blued steel
Price:	$499.00

Cosmetically, the cover has a tough, baked-on black enamel finish that has the appearance of deep, high-gloss bluing, especially when contrasted against the well-figured two-piece walnut stock. Its top is grooved with a 3/8-inch rail for directly mounting a rimfire scope.

Beneath the cover, the internal receiver contains all the action parts. As you lower the finger lever, the locking block drops out from underneath the bolt. Then as the lever is fully lowered, its upward leg engages a cutout in the bolt, pushing the bolt to the fully rearward position.

As the bolt moves rearward, it pushes back, then passes over the hammer, compressing the stout coil mainspring. At the same time, the large hook extractor removes the cartridge case from the chamber. Just before the bolt reaches the limit of its rearward travel, the sear catches the hammer in the cocked position and sets the trigger. Also at that point, the rim of the extracted case hits against the solid ejector, causing the case to fly out from the ejection port and land a few feet to the right of the shooter.

Lifting the lever back up closes the bolt while feeding a fresh cartridge. In the last inch of the lever's travel, it cams the locking block up into a wedge-shaped cutout in the bolt. That method of lockup couldn't be simpler yet is extremely effective. Once the rifle is cocked, the hammer can be lowered to the halfcock notch, which functions as the rifle's safety.

Lockup is by way of a wedge-shaped piece that presses up into a notch in the bottom of the bolt. An upward leg of the action lever engages a slot in the side of the bolt to transfer lever operation to bolt actuation.

The 20-inch octagon barrel is press-fit into the receiver. It is equipped with Marbles adjustable sights, which are some of the most traditional and rugged iron sights you'll encounter on a currently produced rimfire. The front sight is a simple steel post with brass bead, dovetailed into the front of the barrel. The rear sight is a steel leaf with a stamped-steel stepped elevator. The elevator provides approximately 9 inches of elevation adjustment at 25 yards. A steel insert in the rear sight can be reversed for either a "U"- or a "V"-shaped notch, and it provides additional elevation adjustment capacity to fine-tune the Henry's sights for any load or practical shooting distance.